Salt Spray Test Chambers SAL 400-FL


Salt Spray Test Chambers SAL – 400FL is designed compact and easy to use to conduct standard salt spray tests according to: DIN EN ISO 9227 (SAL, ASS, CASS), ASTM B117-73, IEC 60028-2-11 KA,…

This type of chamber can also be used to check condensation (high humidity) according to ISO 6270-2 (CH) but need to recharge the water chamber manually. Therefore, compressed air and pump solution should be turned off by hand.

Advantage of Salt Spray Test Chambers SAL – 400FL:

  • Cost effective solution for basic salt spray (SAL)
  •  Compact front loading (cabinet) design
  • The VLM technology allows the best possible reproducibility of the temperature conditions
  • The test chamber with the bottom made of steel is more robust and less susceptible for damages compared to the competitive products made of glass reinforced plastic
  • Lower cost of ownership compared to the competitive products where the test chamber is made of glass reinforced plastic (shorter test periods, better energy efficiency, easier for service and maintenance, longer life cycle, more resistive to mechanical damages)
  •  User friendly control system with preconfigured test parameters
  • Possible to manually configure and operate this test cabinet acc. to ISO 6270- 2 CH water condensation (high humidity) test
  • Test cabinet is made of recyclable materials
  • All materials required for corrosion testing and devices from one source.

Technical Specifications:

  • Capacity: 400L
  • Inner test chamber dimensions (W x D x H1/H2): 800 x 605 x 920 / 733 mm
  • Outer dimensions of the casing (overall) (W× D× H): 1210 x 922 x 1983 mm
  • Power supply: 230V, 50/60 Hz, 1800W
  • Materials used: The walls of the chamber are made of Polypropylene while the bottom is made of stainless steel and coated with ECTFE. The walls have milled openings for supporting rods
  • Heating: Flat Micanite heaters under the bottom of the chamber for fast and uniform heat transfer
  • Sensors: corrosion resistant and highly sensitive temperature sensor
  • Temperature stability: ± 0,2°C
  • Weight : 256kg
  • Max operating temp: +60˚C

Operating system salt spray test (SAL) according to ISO 9227:

  • Electronically controlled membrane pump (flow monitor)
  •  High performance nozzle with adjustable air cap made of PEEK
  •  Transparent humidifier of Duran glass with easily replaceable PE-sintered filters for fine distribution of compressed air or full saturation with moisture and automatic water refill
  •  Manually controlled air purge in order to blow out the salt mist from the test area before opening the lid

Besides we have salt spray test 600L, 1000L, 3000L, 3500L.

Download catalog Salt spray test SAL400-FL-v5








This post is also available in: Tiếng Việt



VLM là hãng sản xuất cung cấp các thiết bị thử khí hậu như tủ thử ăn mòn khí hậu, tủ thử khoang phun muối, tủ thử với độ ẩm cao, các thiết bị phục vụ trong phòng thí nghiệm với các tiêu chuẩn quốc tế. VLM cung cấp các giải pháp công nghệ tốt nhất cho việc kiểm tra ăn mòn khí hậu, làm nóng mẫu phòng thí nghiệm, nồng độ mẫu để đáp ứng các yêu cầu kiểm tra của khách hàng.

This post is also available in: Tiếng Việt

casino online infini88 bonanza88 judi baccarat online  slot slot online togel poker online agen sbobet tangkasnet slot pragmatic slot gacor sbobet slot dana judi online pokerseri  autowin88 ligasedayu  bos88 nuke gaming slot cuan138 gaspol168 ligaplay88 slot5000 sky77 bro138 idn poker toto togel 4d